Set-up Instructions

SET-UP IS QUICK AND EASY!

1. UNFOLD YOUR AIRBED AND LAY FLAT ON THE FLOOR NEXT TO A PLUG POINT.

2. PLUG IN YOUR ELECTRIC PUMP AND SELECT THE MEDIUM SIZED NOZZLE. ATTACH THIS TO THE END OF YOUR PUMP IF IT IS NOT ALREADY ON.

3. YOUR AIRBED HAS A TWO LAYER VALVE. MAKE SURE THE FIRST LAYER OF THE VALVE IS FULLY INSERTED INTO THE BED AND THE COVER IS OPEN.

4. INSERT PUMP NOZZLE INTO THE VALVE AND SWITCH ON. IN SECONDS YOUR AIRBED WILL BE INFLATED!

5. ONCE BED IS INFLATED, REMOVE PUMP AND SWIFTLY SHUT THE COVER. IF THE BED DEFLATES AS SOON AS YOU REMOVE THE PUMP, YOU HAVE NOT CLOSED THE FIRST VALVE LAYER AND NEED TO SHUT THIS AND THEN INFLATE.

6. REPEAT UNTIL ALL BEDS ARE INFLATED.

7. COVER EACH BED WITH A SHEET AND TUCK ANY LOOSE MATERIAL UNDERNEATH.

8. LAY SLEEPING BAG ON EACH BED

9. OPEN SLEEPING BAG ZIPS AND PULL TOP LAYER TO THE SIDE.

10. LAY SLEEPING BAG LINER INSIDE THE BAG WITH THE PILLOW CASE SECTION ABOVE THE TOP OF THE SLEEPING BAG.

11. INSERT PILLOW INTO THE CASE.

12. ZIP UP SLEEPING BAGS.

13. SWITCH ON NIGHTLIGHTS AND PLUG IN DISCO LIGHT TO ILLUMINATE THE ROOM!

14. ENJOY HOT CHOCOLATE IN YOUR SLEEP STARS MUGS .

15. TO PACK UP, PUT LINERS AND SHEETS BACK IN THEIR BAGS AND ROLL UP SLEEPING BAGS INTO THEIR CASES. UNDO BOTH LAYERS OF THE AIRBED VALVES AND ROLL UP TO RELEASE THE AIR. POP EVERYTHING EXCEPT YOUR MUGS BACK IN THE BOX AND YOU’RE READY TO TAPE UP YOUR BOXES.